Testing The Printer - Seiko SLP100 User Manual

6 Close the label cover.

Testing the Printer

A quick test lets you know your printer is operating
properly and that the labels are loaded correctly. Here's
how to proceed:
1 Press and hold the
turn the printer off.
2 Press and hold the
while you press and release the
If the test is successful, the SLP 100/200/240 will print a
test label.
User Guide
Smart Label Printer
Chapter 2
power button for 2 seconds to
form feed button
power button.
Firmware Version 3.0
Getting Started
2-9