Adjusting The Position Of Labels - Seiko SLP120 User Manual

Adjusting the Position of Labels

If you find the labels are advancing at an angle, it's easy to
realign them. Follow these steps:
1 Remove the print engine cover by grasping it on the top
and tilting it toward you.
2 Release the pressure on the label stock by moving the
platen release lever toward the back of the SLP.
Remove the print engine cover
3 Realign the label stock so it is straight.
4 Return the platen release lever to the locked position.
5 Make sure the labels feed through the slot.
6 Insert the tabs on the lower edge of the print engine
cover into the slots on the SLP and push the top edge for-
ward until the cover snaps into place.
3-6
Changing Labels and Printer Care
Chapter 3
Smart Label Printer Models 220 and 120
Release the platen lever
and rotate the platen knob