Checking Jumper Settings; Jumper Settings - PCchips M922ULR Manual

Checking Jumper Settings

The following illustration shows the location of the mainboard jumpers. Pin 1 is
labeled.

Jumper Settings

Jumper Type Description
JP1 3-pin Clear CMOS
jumper
JP3 3-pin BIOS flash pro-
tection jumper
JP5 2-pin FSB speed se-
lect jumper
Jumper 1 – This jumper enables you to reset BIOS. Follow these instructions:
1. Turn the system off.
2. Short pins 2 and 3 on JP1.
3. Return the jumper to the normal setting.
Setting (default)
1-2: Normal
2-3: Clear CMOS
1-2: Unprotected
2-3: Protected
Short: Auto-detect
(400 or 533MHz)
Open: 533MHz
9
JP1
1
JP3
1
JP5