Main Menu
Main Menu
Table of Contents
Selecting a Customize Group
With the ignition switch in the ON
(II) position, press the INFO button
for more than 3 seconds, then
release it. The CUSTOMIZE ENTRY
screen appears on the multi-
information display.
Select CHG SETTING, and press the
SEL/RESET button.
Each time you press the INFO ( /
) button, the display changes as
▼
shown in the illustration. Select
which of these customize groups you
want to change:
METER SET UP
POSITION SET UP
KEYLESS ACCESS SET UP
LIGHTING SET UP
DOOR/WINDOW SET UP
WIPER SET UP
If you select EXIT and press the
SEL/RESET button, the
CUSTOMIZE ENTRY screen is
shown again.
▲
Press the
▲
or
Press the SEL/RESET button.
Multi-Information Display
▼
button.
TO METER
SET UP
see page
82
TO POSITION
SET UP
see page
85
TO KEYLESS
ACCESS SET UP
see page
88
TO LIGHTING
SET UP
see page
91
TO DOOR/
WINDOW SET UP
see page
94
TO WIPER
SET UP
see page
99
81