Acura RL 2005 Online Reference Owner's Manual page 113

Main Menu Main Menu Table of Contents
Steering Wheel Adjustments
When you turn the ignition switch to
LOCK (0) and release it, or remove
the built-in key from the ignition
switch, the steering wheel
automatically moves fully in and up.
The steering wheel returns to its
original position when you push the
ignition switch or insert the built-in
key back in the ignition switch.
Steering wheel movement is also
controlled by the driving position
memory system (see page
To change the ''AUTO TILT &
TELESCOPIC'' setting, see page
112
If your vehicle's battery is
disconnected or goes dead, or the
fuse for the power tilt and telescopic
steering wheel is removed, the
power tilt and telescopic steering
wheel system needs to be reset
when you reconnect the battery or
installing the fuse.
To reset the system when the auto tilt
and telescopic feature is turned on, do
this:
Push the ignition switch for more
124 ). than 1 second and release it, or
insert the built-in key into the
ignition switch, and remove it. The
86 . steering wheel automatically moves
fully in and up to let you know the
system is reset.
To reset the system when the auto tilt
and telescopic feature is turned off, do
this:
Move the steering wheel to the
highest position and keep that
position by pushing and holding the
adjustment button for more than 1
second. Then, move the steering
wheel to the most inward position,
and keep that position by pushing
and holding the adjustment button
for more than 1 second.