Acura RL 2005 Online Reference Owner's Manual page 321

Main Menu Main Menu Table of Contents
Lights
Replacing Rear Bulbs
MOUNTING NUT
MAINTENANCE LID
1. Open the trunk lid, and remove
the left or right maintenance lid.
Remove the mounting nut with an
2.
8 mm wrench.
320
BOLTS
TAIL LIGHT TRIM
3. Carefully pry in the top or bottom
edge of the with a small flat-tipped
screwdriver, and pull the trim
straight back.
4. Remove the two mounting bolts
with an 8 mm wrench.
5. Pull the taillight assembly straight
back out of the body.
BULBS
6. Determine which of the two bulbs
is burned out: turn signal or back-
up light.
7. Remove the socket by turning it
one-quarter turn counterclockwise.
8. Remove the burned out bulb by
pulling it straight out of its socket.