Acura RL 2005 Online Reference Owner's Manual page 64

Main Menu Main Menu Table of Contents
Vehicle Stability Assist
(VSA) System Indicator
This indicator normally comes on for
a few seconds when you turn the
ignition switch to ON (II).
If it comes on and stays on at any
other time, or it does not come on
when you turn the ignition switch to
ON (II), there is a problem with the
VSA system. You will also see a
''CHECK VSA SYSTEM'' message
on the multi-information display (see
page ). Take your vehicle to a
76
dealer to have it checked. Without
VSA, your vehicle still has normal
driving ability, but will not have VSA
traction and stability enhancement.
For more information, see page
VSA Activation Indicator
This indicator has three functions.
1. It comes on as a reminder that you
have turned off the vehicle
stability assist (VSA) system.
2. It flashes when VSA is active (see
page ).
281
3. It comes on along with the VSA
system indicator if there is a
problem with the VSA system.
You will also see a ''CHECK VSA
SYSTEM'' message on the multi-
information display (see page
281 . This indicator normally comes on for
a few seconds when you turn the
ignition switch to ON (II). For more
information, see page
Instrument Panel Indicators
The left or right turn signal indicator
blinks when you signal a lane change
or turn. If the indicator does not
blink or blinks rapidly, it usually
means one of the turn signal bulbs is
burned out (see page
the bulb as soon as possible, since
other drivers cannot see that you are
signaling.
When you press the hazard warning
button, both turn signals blink. All
turn signals on the outside of the
76 ). vehicle should flash.
281 .
Turn Signal and
Hazard Warning
Indicators
316 ). Replace
63