Brake System Indicator - Acura RL 2005 Online Reference Owner's Manual

Table of Contents Table of Contents
Main Menu Main Menu

Brake System Indicator

U.S. Canada The brake system
indicator normally
comes on when
you turn the ignition switch to ON
(II) and as a reminder to check the
parking brake. If you do not release
the parking brake, the indicator will
stay on, and you will see a
''RELEASE PARKING BRAKE''
message on the multi-information
display.
If the brake system indicator comes
on while driving, the brake fluid level
is probably low. You will see a
''BRAKE FLUID LOW'' message on
the multi-information display. Press
lightly on the brake pedal to see if it
feels normal. If it does, check the
brake fluid level the next time you
stop at a service station (see page
311 ).
350
If the fluid level is low, take your
vehicle to a dealer, and have the
brake system inspected for leaks or
worn brake pads.
However, if the brake pedal does not
feel normal, you should take
immediate action. A problem in one
part of the system's dual circuit
design will still give you braking at
two wheels. You will feel the brake
pedal go down much farther before
the vehicle begins to slow down, and
you will have to press harder on the
pedal.
You will also see a ''CHECK BRAKE
SYSTEM'' message on the multi-
information display.
Slow down by shifting to a lower
gear, and pull to the side of the road
when it is safe. Because of the long
distance needed to stop, it is
hazardous to drive the vehicle. You
should have it towed and repaired as
soon as possible (see
Emergency
Towing on page 360 ).