Table of Contents
Advertisement
Compliance and Certifications
Safety
This product is designed to meet the requirements of the following electrical equipment safety
standards for measurement, control, and laboratory use:
•
IEC 61010-1, EN 61010-1
•
UL 61010-1, CSA 61010-1
For UL and other safety certifications, refer to the product label or the
Note
Product Certification
Electromagnetic Compatibility
This product meets the requirements of the following EMC standards for electrical equipment
for measurement, control, and laboratory use:
•
EN 61326-1 (IEC 61326-1): Class A emissions; Basic immunity
•
EN 55011 (CISPR 11): Group 1, Class A emissions
•
AS/NZS CISPR 11: Group 1, Class A emissions
•
FCC 47 CFR Part 15B: Class A emissions
•
ICES-001: Class A emissions
In the United States (per FCC 47 CFR), Class A equipment is intended for
Note
use in commercial, light-industrial, and heavy-industrial locations. In Europe,
Canada, Australia, and New Zealand (per CISPR 11), Class A equipment is intended
for use only in heavy-industrial locations.
Group 1 equipment (per CISPR 11) is any industrial, scientific, or medical
Note
equipment that does not intentionally generate radio frequency energy for the
treatment of material or inspection/analysis purposes.
For EMC declarations, certifications, and additional information, refer to the
Note
Online Product Certification
CE Compliance
This product meets the essential requirements of applicable European Directives, as follows:
•
2006/95/EC; Low-Voltage Directive (safety)
•
2004/108/EC; Electromagnetic Compatibility Directive (EMC)
Online Product Certification
Refer to the product Declaration of Conformity (DoC) for additional regulatory compliance
information. To obtain product certifications and the DoC for this product, visit
certification, search by model number or product line, and click the appropriate link in the
Certification column.
section.
section.
NI 6587 Getting Started Guide | © National Instruments | 27
Online
ni.com/
Advertisement
Table of Contents
