Configuration Page Information; Overview; Error Log - Ricoh MD-P1 Service Manual

5. System Maintenance Reference

Configuration Page Information

Overview

The configuration page for this model has information about the machine's status. Print this sheet as shown
below. Check the configuration page when doing machine maintenance.
To Print the Configuration Page from the Machine
Before turning on the machine
1. Hold down the "Stop/Start" key, and then turn on the main switch of the printer with holding down
the "Stop/Start" key.
5 2. Keep holding down the "Stop/Start" key until the "Alert LED" is blinking.
When the machine is power-on
1. Press "Menu" key.
2. Press the "5" or "7" key to select "List/Test Print", and then press the "#Enter" key.
3. Press the "#Enter" key at the "Config. Page".
To Print the Configuration Page from the SOM
1. Turn on the machine and the PC.
2. Start "Smart Organizing Monitor".
3. Select "Configuration Page" in "List/Test Print" on the "User Tools" tab.
4. Click "Print", and then "Yes".
5. The configuration page is printed.

Error Log

The Error Log on the configuration page has the error logs (SC codes) and the following information.
However, the following error codes cannot be stored after turning off the machine.
86