Ricoh MD-P1 Service Manual page 153

Item
Tray1
Tray2
Bypass Tray
Selections
Horizontal
Vertical
Horizontal (-15 to +15) step
Vertical (-15 to +15) step
Horizontal
Vertical
Smart Organizing Monitor
Remarks
1.32mm per step. Range is -15mm to
+15mm.
If the machine settings are reset to the factory
defaults, this value does not change.
The printer will exit the energy saver state
after this setting is changed.
0.24mm per step. Range is -3.6mm to
+3.6mm.
If the machine settings are reset to the factory
defaults, this value does not change.
The printer will exit the energy saver state
after this setting is changed.
1.32mm per step. Range is -5mm to +5mm.
If the machine settings are reset to the factory
defaults, this value does not change.
The printer will exit the energy saver state
after this setting is changed.
0.24mm per step. Range is -3.6mm to
+3.6mm.
If the machine settings are reset to the factory
defaults, this value does not change.
The printer will exit the energy saver state
after this setting is changed.
1.32mm per step. Range is -5mm to +5mm.
If the machine settings are reset to the factory
defaults, this value does not change.
The printer will exit the energy saver state
after this setting is changed.
0.24mm per step. Range is -3.6mm to
+3.6mm.
If the machine settings are reset to the factory
defaults, this value does not change.
The printer will exit the energy saver state
after this setting is changed.
4
53