4. Replacement and Adjustment
1. Rear cover (* p.23)
2. Left cover (* p.27)
3. Paper feed clutch (* p.63)
4. Transport/Fusing motor (*p.61)
4
5. Lower transport gear unit [A] (screw x 3, connector x 3 for P1c/ connector x 2 for P1b)
• The picture on the left side shows the P1c model.
• The picture on the right side shows the P1b model (no duplex).
6. Registration clutch [B] (clip x 1, connector x 1)
7. Duplex clutch [C] (clip x 1, connector x 1)
• The picture above shows the P1c model. No duplex clutch is in the P1b model.
52