Eeprom - Ricoh MD-P1 Service Manual

4. Tray set sensor assembly [A] (screw x 1, connector x 1)
5. Tray set sensor [B] (hooks)

EEPROM

• Replacement and Reinstallation procedures for the EEPROM are included in the "EGB (Engine Board)"
replacement procedure. Refer to "EGB (Engine Board)" for details.
When replacing an old EEPROM with a new EEPROM, EEPROM setting is required. Follow the EEPROM
setting procedure described below.
EEPROM Setting
• Do the following steps 1 to 11 with the front cover of the machine open. After completing these steps,
turn off the machine.
Electrical Components
4
81