Ricoh MD-P1 Service Manual page 138

4. Appendix: SP Mode Tables
Group (Tab)
TCP/IP
4
TCP/IP
TCP/IP
38
Item Selections
IP address xxx.xxx.xxx.xxx
Subnet mask xxx.xxx.xxx.xxx
Default
Gateway xxx.xxx.xxx.xxx
address
DHCP On */ Off
Remarks
This setting is not available if DHCP is enabled.
If this setting is changed, the printer power must
be turned off/on for the new setting to take
effect.
The default setting is "192.0.0.192" when
DHCP is off.
This setting is not available if DHCP is enabled.
If this setting is changed, the printer power must
be turned off/on for the new setting to take
effect.
Will show all zero if network initialization is not
finished. Any change will be ignored before the
end of network initialization.
The default setting is "255.255.255.0" when
DHCP is off.
This setting is not available if DHCP is enabled.
If this setting is changed, the printer power must
be turned off/on for the new setting to take
effect.
Will show all zero if network initialization is not
finished. Any change will be ignored before the
end of network initialization.
The default setting is "192.0.0.192" when
DHCP is off.
If this setting is changed, the printer power must
be turned off/on for the new setting to take
effect.