Montering / Assembly - Abilica Mill 2.0 Manual

MONTERING / ASSEMBLY

Hardware packing list
Part # Description
M8x15 mm. Bolt
M8x45 mm. Bolt
Flat Washer (φ16-φ9*T1.6)
Lubricant Oil
NOTE: 1. Above described parts are all the parts you need to assemble this
treadmill. Before you start to assemble, please check the hardware packing
to make sure they are included.
2. Please find tools in the hardware pack to help you assemble this treadmill
easier.
STEP ONE：Assemble the posts
Lift the upright post 2L and 2R, Use the bolt (M8 x 45, No3) and (M8 x 15,No5)
with flat washer(No4) to fix the both upright post on the deck frame(Please
not fix too tight before your assemble all the bolt).
Quantity Part # Description
(PCS)
6 ￠4x16mm Screw
2
Safety key
8
Allen key
1
6
Quantity
(PCS)
4
1
1