4.
Remove five M3 screws using PH2 Phillips Screwdriver.
5.
Remove five Antenna cables from Antenna Plate by hand, then remove it (include O-ring).
6.
Remove ten M3 screws using PH2 Phillips screwdriver.
7.
Remove GPS Antenna cables and PSU connector from the PCBA by hand, then remove the PCBA.
MF877-00
Template Revision C, 30-July-2018
Page 4
Copyright 2018 Hewlett Packard Enterprise Development LP
HPE instructions for this template are available at
MF877-01