Advertisement
3.2 Optional Graphic. If the disassembly process is complex, insert a graphic illustration below to identify the items
contained in the product that require selective treatment (with descriptions and arrows identifying locations).
1.
Remove accessories.
2.
Remove four M5 screws using T25 Tamper Resistant Torx screwdriver from holder, then remove holder and
solar mask.
3.
Remove eight M5 screws using T25 Tamper Resistant Torx screwdriver, then remove Top Cover.
MF877-00
Template Revision C, 30-July-2018
Page 3
Copyright 2018 Hewlett Packard Enterprise Development LP
HPE instructions for this template are available at
MF877-01
Advertisement
