HPE AP-585 Product End-Of-Life Disassembly Instructions page 5

8. Remove five M3 and one M4 screws using PH2 Phillips screwdriver, then remove the PSU.
9. Remove the air vent.
10. Remove four M3 screws using T8 Tamper Resistant Torx screwdriver, then remove GPS Cover.
11. Remove four M3 screws using PH2 Phillips screwdriver, then remove GPS PCBA.
MF877-00
Template Revision C, 30-July-2018
Page 5
Copyright 2018 Hewlett Packard Enterprise Development LP
HPE instructions for this template are available at MF877-01