Integrated Cleaning Programme - Melitta CI E970-003 Operating Instructions Manual

Cleaning and maintenance
continue (hot water runs out of the outlet
during the process). The appliance is
then ready for operation.
36
Cleaning parts of the milk system
It is recommended to clean the milk
container (depending on the model), milk
distributor and the cover of the front milk
distributor regularly, in addition to the
"Intensive Cleaning programme".
■ Disconnect the tube from the outlet.
■ Flip open the outlet forwards.
■ Pull the milk unit downwards in the
direction of the arrow and out of the
outlet (Image G).
■ Remove the front cover from the milk
distributor (Image H).
■ Rinse the individual parts with hot water.
■ Reassemble the parts in reverse order.

Integrated cleaning programme

The integrated cleaning programme (takes
about 10 minutes) removes residues and
coffee oil residues that cannot be removed
by hand. The progress bar on the text
display 4 shows the current progress of
the cleaning programme.
The cleaning programme should be
performed every 2 months or after
200 brewed cups of coffee, at the latest,
however, when a corresponding message
appears on the text display 4.
Only use Melitta PERFECT CLEAN
®
cleaning tabs.
■ Flip up the lid of the water tank 6.
■ Pull the water tank 6 up and out of the
appliance.
■ Fill the water tank 6 with tap water up to
the max. mark.
■ Reinsert the water tank 6.
■ Connect the tube to the drip tray and to
the outlet (Image D).
■ Call up the Care sub-menu.
■ Select Cleaning in the menu.
■ Select Start in the menu. The cleaning
programme starts.