Starting Up The Appliance - Melitta CI E970-003 Operating Instructions Manual

Starting up the appliance

Switching on for the first time
WARNING
Danger of fire and electric shock
due to incorrect supply voltage,
incorrect or damaged connections
and power cable!
▶ Ensure that the supply voltage
corresponds to the supply voltage
specified on the identification label of
the appliance. The identification label is
located on the right side of the appliance
behind the cover (Figure B, 13).
▶ Make sure that the power socket meets
the applicable standards for electrical
safety. If in doubt, contact a qualified
electrician.
▶ Never use damaged power cables
(damaged insulation, bare wires).
■ Place the appliance on a stable, dry and
level surface with sufficient clearance
(at least 10 cm) to the sides.
■ Plug the power cable into a suitable
power socket.
■ Press the
button to switch on the
appliance.
After switching on, first set the language
and then the time.
■ Turn the rotary switch (Figure A, 10)
to selective the respective setting
(language, hour, minute).
■ Press the rotary switch to save the each
setting.
Starting up the appliance
After making the settings, fill the bean
container:
■ Filling the bean container (Page 28).
Then fill the water tank:
■ Lift up the lid of the water tank 6 and
pull the water tank up and out of the
appliance.
■ Fill the water tank with fresh tap water
only up to the max. mark.
■ Insert the water tank into the appliance.
■ Press the rotary switch.
■ Place a vessel under outlet 3.
■ Press the rotary switch. First, an
automatic rinsing is carried out.The
appliance is ready for operation when
the buttons illuminate.
27