First-Things-First (Required Initial Setup); Initial Signal Connections; Digital (Dtv) Rf Antenna Connection; Analog Rf Antenna Connection - Sanyo HT30746 Owner's Manual

Sanyo ht30746: instruction manual
Hide thumbs Also See for HT30746:
Table of Contents

Advertisement

FIRST-THINGS-FIRST (REQUIRED INITIAL SETUP)

This new high-definition digital television is capable of reproducing a crystal clear
picture and exceptional sound. The signal makes the difference!
1

INITIAL SIGNAL CONNECTIONS

Digital (DTV) RF Antenna Connection

Connect an RF antenna to the Digital Antenna In
terminal.
The digital tuner in this DTV receives HD signals
from an antenna. Digital signals from a Set-top Box
are received through the Component In jacks.
This DTV can receive ANY resolution being broad-
cast (HDTV, EDTV, or SDTV). However, ALL
resolutions are converted to 1080i for display.

Analog RF Antenna Connection

Connect a Cable signal (with or without a cable
box) or RF antenna to the Analog RF input.
The analog tuner in this DTV receives Analog
Antenna signals, Analog Cable signals, or the RF
output from a VCR or cable box.
Analog Cable
VCR Back
IN
FROM ANT.
OUT
OUT TO TV
CATV FRANCHISE NOTE: Cable
companies, like public utilities,
are franchised by local govern-
ment authorities. To receive
DTV Back
cable programs, even with
equipment which is capable of
receiving cable channels, the
UHF/VHF/CATV
consumer must subscribe to
the cable company's service.
Notes: If you do not have a VCR, connect signal directly to the TV 75 ohm terminal
(UHF/VHF/CATV).
Don't be fooled by the phrase "Available in High-Definition." The only
resolution available with any of these analog connections, regardless of the
original content, is standard analog (SDTV).
I
DTV will select the correct Antenna mode for the type of Analog RF
signal connected automatically.
I
Use "Analog Antenna Signal" in the Setup menu to change the
Antenna Mode.
OR
Need help?
DTV Back
DIGITAL
ANTENNA IN
Cable
Box
IN
OUT
IN
VCR Back
FROM ANT.
OUT
OUT TO TV
DTV Back
UHF/VHF/CATV
I
If you move the DTV to a new location, press the RESET key twice
after connecting the signal and turning on the DTV.
www.sanyoctv.com
Visit our Web site at
RF
Antenna
OR
IN
FROM ANT.
OUT
OUT TO TV
UHF/VHF/CATV
(Continued on next page.)
1-800-877-5032
or Call
RF
Antenna
VCR Back
DTV Back
5

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents