Analog Av Connections; Using The Analog Video Jacks To Connect A Vcr (Or Other Analog Device); Connecting Analog Audio Out Jacks To A Stereo Amplifier - Sanyo HT30746 Owner's Manual

USING THE ANALOG VIDEO JACKS
TO CONNECT A VCR (OR OTHER
ANALOG DEVICE)
Switch off DTV and external equipment before connect-
ing cables. (Cables are not supplied.)
1
Connect VCR's Audio Video Out to the DTV's
INPUT1 jacks.
NOTE: For Mono VCR (Single Audio Jack), connect VCR
Audio Out to DTV Audio (L) Input.
2 2
Optional
Connect VCR's S-Video Out to the DTV's S-Video In
Jack.
NOTE: S-Video jack connections override INPUT1 Video
jack connection.
3
Press POWER to turn on the DTV, then turn on
external equipment.
4
Press INPUT to select Video1 to
view the VCR program.
BACK VIEW OF VCR
1
DTV AV
INPUT
JACKS
REMOTE CONTROL
NOTES: Don't be fooled by the phrase
INPUT
POWER
1 2 3
4
4 5 6
3
What you will need for connections:
Audio Video Cable – 1
S-Video Cable – 1

ANALOG AV CONNECTIONS

S-VIDEO
2 2
JACK
"Available in High-Definition."
Composite jacks offer only 480i
(SDTV) resolution.
To view available High-Defini-
tion (HD) programs, you must
connect your HD equipment to
the Component or HDMI jacks.
Need help?
CONNECTING ANALOG AUDIO OUT
JACKS TO A STEREO AMPLIFIER
Switch off DTV and external equipment before connect-
ing cables. (Cables are not supplied.)
1
Connect the DTV Audio Out (R/L) to the Stereo
Amplifier In (R/L).
2
Press POWER to turn on the DTV, then turn on
external equipment.
NOTE: Do not connect external speakers directly to the DTV.
STEREO AMPLIFIER
IMPORTANT NOTE FOR MONITOR USE:
If you did not connect an antenna, you must run All Channel
Search twice before you can select the AV inputs.
I
Press the INPUT key after connecting cables to access the Video1
input. There is NO need to tune to a blank channel.
I
"No Signal" will appear randomly on the screen when no signal is
detected at the INPUT1 video jack.
I
Position your DTV at least 2 feet from stereo speakers. The magnets
in the speakers may affect the picture quality.
www.sanyoctv.com
Visit our Web site at
BACK VIEW
OF DTV
1
REMOTE CONTROL
INPUT
POWER
1 2 3
4 5 6
1-800-877-5032
or Call
2
11