Connect A Video Game (Or Other Analog Device) - Sanyo HT27546 Owner's Manual

USING THE FRONT VIDEO AND AUDIO INPUT JACKS TO
CONNECT A VIDEO GAME OR OTHER EQUIPMENT
Switch off TV and external equipment before connect-
ing cables. (Cables are not supplied.)
1
Connect game Audio Output (R/L) to the TV Audio
Input (R/L). Then connect game Video Output to
the TV Video Input.
2
Press POWER to turn on the TV, then turn on
external equipment.
3
To access Audio / Video inputs,
press the INPUT key to select
Video1.
What you will need for
connections:
Audio Video Cable – 1
IMPORTANT NOTE FOR MONITOR USE:
If you did not connect an antenna, you must run All
Channel Search twice before you can select the AV inputs.
I
"No Signal" will appear randomly on the screen when no signal is
detected at the VIDEO1 input jack.
I
Press the INPUT key after connecting cables to access the AV
inputs. There is NO need to tune to a blank channel.
ANALOG AV CONNECTIONS
Need help?
1
CAMCORDER
REMOTE CONTROL
INPUT
POWER
1 2
3
4 5
www.sanyoctv.com
Visit our Web site at
VIDEO GAME
3
2
6
1-800-877-5032
or Call
11