Sanyo HT27546 Quick And Easy Setup

TUNER
Quik 'N Easy Setup
st
1
CONNECT
ANTENNAS
CONNECT DIGITAL ANTENNA
To receive your local Digital channels you
must connect an antenna to the Digital
Antenna In terminal on the back of the
DTV. Other digital signals can be received
from a set-top box (STB) through the
Component INPUT2 jacks (Item 3 below).
The signal makes the difference.
To receive analog channels, connect an
antenna or your analog cable system to the
UHF/VHF/CATV terminal.
Antenna
UHF/VHF/CATV
or
Cable UHF
VHF
CATV
AUDIO VIDEO2
OUTPUT
S-VIDEO
(MONO) R
L
R
P
R
Antenna
DIGITAL
ANTENNA IN
r r d d
3 3
DVD PLAYER AND OTHER
DIGITAL EQUIPMENT CONNECTIONS
BEFORE YOU MAKE ANY AV CONNECTIONS...
THE SIGNAL MAKES THE DIFFERENCE
Signal quality is the Number One factor affecting picture quality.
That being said, it is important to understand that the signal will repro-
duce differently, depending on how you connect your external equip-
ment to the DTV.
Critical Hookup Advice for Best Picture
1. DO NOT connect your DVD
player or similar digital AV
device to the Composite
VIDEO2 jacks on the DTV.
2. DO NOT connect the RF
output of a Satellite receiver or
Digital Cable box to the RF
input terminal on the DTV
(UHF/VHF/CATV).
A/V OUT DIGITAL COMPONENT OUT
HDMI
AUDIO OUT (1080i/720p/480p)
(480i) OUTPUT
Y
VIDEO
IN
S-VIDEO L P B
OUT
AUDIO
OUT
P R
R
DTV Back
UHF
VHF
CATV
DIGITAL AUDIO
AUDIO VIDEO2
OUTPUT
OUTPUT
S-VIDEO
(MONO)
(MONO) VIDEO
R L
L
R
P R P B Y
DO NOT Connect a Satellite Receiver
or Digital Cable Box to the RF Terminal
2
BEGIN ALL CHANNEL SEARCH
Channel Search Note:
Before starting All Channel Search, point your anten-
na(s) toward the transmitting tower(s). (Log onto
www.antennaweb.org, then type in your street
address and zip code to view a list of your local chan-
nels and the type of antenna that is necessary to receive
them. Click on "View Street Level Map" to see a map
and graph of the transmitting towers in your area.)
The channel search process may take a few minutes.
Please be patient.
Monitor Usage Note:
If you did not connect an
antenna in Item 1, you must
run All Channel Search twice.
Follow the on-screen instruc-
tions. See Item 3 below to
connect a DVD player or sim-
DIGITAL AUDIO
OUTPUT
ilar Audio Video (AV) device.
(MONO)
L VIDEO
After the second channel
P Y DIGITAL ANTENNA IN
B
search is complete, you can
use the INPUT key to select
the AV inputs, for monitor use.
COMPONENT VIDEO OUT
P P Y VIDEO OUT SELECT
R B
S
OPT.
DIGITAL S-VIDEO OUT COPONENT
HDMI
OUT
R L
INPUT
AUDIO OUT VIDEO OUT
UHF
VHF
CATV
AUDIO VIDEO2
OUTPUT
S-VIDEO
(MONO)
(MONO) R L
L
R
DTV
Back
DO NOT Connect Your
DVD Player to the Composite Input Jacks
These connections should be used
only with Analog equipment, such
as a VCR. Avoid connecting digi-
(1080i/7
tal equipment to these jacks, as
that will reduce the picture quality.
To display the clearest images
from your DVD player or other
digital AV device, you must con-
nect them to the DTV using the
COMPONENT input jacks.
nd
SEARCH FOR AVAILABLE
CHANNELS
INPUT
key
INPUT
POWER
1 1 1 2 2 3 3
4 4 5 5 6 6
7 7 8 8 9 9
CAPTION EXIT
M
CH VOL
PIX SHAPE AUDIO RESET

DVD PLAYER CONNECTION

THE SIGNAL MAKES THE DIFFERENCE
The Component jacks on this DTV will accept any video signal resolu-
tion, making Component a great choice when connecting your DVD
player or similar digital AV device, such as, a Satellite receiver, Digital
Cable Box, or video game.
Connecting a DVD Player to the Component Video2 Jacks
1 Simply connect a Component
cable's Red, Blue, and Green
connectors to the VIDEO2 Red,
Blue, and Green video jacks on
the DTV and to a DVD player,
as shown here. (Cable is not
DIGITAL AUDIO
OUTPUT
VIDEO
supplied.)
DIGITAL ANTE
2 Then connect an Audio cable's
White and Red connectors to
the VIDEO2 audio jacks and to
the DVD player. (Cable is not
supplied.)
3 Use the INPUT key on the
remote control to select Com-
ponent2 as the input source.
NOTE: The Component and Composite
VIDEO2 inputs share the same
audio inputs, therefore, you can
connect only one device at a time to
the VIDEO2 inputs.
AS
Call Us, We Can Help!
1-800-877-5032
www.sanyoctv.com
Press the POWER key.
1
First
Please connect all signals
and antennas to jacks and
the terminals on the back.
Then press Channel UP key.
Initial On-Screen Display
Press the CH L (channel up) key to start
2
All Channel Search.
POWER
No input signal sources
key could be located.
Please check cable or
antenna connections.
CHANNEL
UP key
Then press Channel UP key.
No Signal Detected—Press CH L Again
(most common method)
DTV
Back
AUDIO VIDEO2
OUTPUT
(MONO)
L
R
P
Video
(Step 1)
DVD Player
(or Satellite receiver,
Digital Cable box,
video game, etc.)
VIDEO OUT SELECT
S
OPT.
S-VIDEO OUT COPONENT
DIGITAL
OUT
NOTE
: Subscription
to Cable or Satellite service is required
for those connections.
Part Number: 1JC6P1P0231A-
Audio
(Step 2)
S-VIDEO
R L VIDEO
P Y
R B
COMPONENT VIDEO OUT
P Y
P R B
R L
AUDIO OUT VIDEO OUT