Using The Remote Control - Sanyo DS24425 Owner's Manual

Sanyo ds24425: owners manual

Hide thumbs Also See for DS24425:

Owner's manual (55 pages)

Owner's manual (25 pages)

Service manual (30 pages)

Table of Contents

Available languages

INSTALL BATTERIES AS SHOWN (2 AAA, not included)

Notes:

–

Do not mix old batteries with new ones or mix different types of

batteries together.

–

Remove the batteries if the remote control will not be used for a

month or more. Weak batteries may leak and cause damage.

(Normal battery life is roughly six months.)

IMPORTANT NOTE: Spent or discharged batteries must be recycled or

disposed properly in compliance with all applicable laws. For detailed

information, contact your local County Solid Waste Authority.

REMOTE CONTROL KEYS

Power Key—Press to turn TV ON or OFF.

Input Key—Press to select the program source to watch:

TV signal or signal from DVD Player or other equipment

you have connected to the A / V jacks.

Number Keys—Press two keys to select a channel.

Example: Press 0 then 6 to select channel 6. For cable

channels 100 through 125, press and hold the 1 key until

C1– – appears. Then press the other two numbers.

Caption Key—(See page 12.)

Menu Key—Use this key with the LM and – + keys to

navigate and adjust features of the on-screen menu system.

(See pages 10 ~ 12.)

‘

Channel Scanning (CH LM) and Volume (VOL – +)

Keys—Press to scan through the channels in memory and

to adjust the volume.

I Be sure batteries are installed correctly.

I Point the remote control toward the TV. Objects between

the remote control may cause misoperation of the remote

control function.

I Cannot select channel with number keys. Press "0" in

front of numbers 1~9. Example: Channel 05.

I Adjusting the volume level: Flashing Right arrow

indicates volume is increasing and flashing Left arrow

indicates volume is decreasing.