D-Link DVG-5004S User Manual page 7

DVG-5004S/5008S User's Manual
Rear Panel
DVG-5004S
DVG-5008S
WARNING: DO NOT
phone port directly to a PSTN line (FXS to PSTN) or to an internal PBX line (FXS to PBX extension).
Doing so may damage your VoIP gateway.
To restore factory default settings (IP address, User's Name, Password):
(1) Disconnect the power plug.
(2) Press andw hold the reset button for 6 seconds.
(3) Reconnect the power plug while pressing down on the reset button.
(4) Release the reset button after 6 seconds. Factory settings will be restored.
D-Link Systems, Inc.
(1) connect the phone ports to each other (FXS to FXS) or (2) connect any
Hardware Description
3