D-Link DVG-5004S User Manual page 18

Hide thumbs Also See for DVG-5004S:

DVG-5004S/5008S User's Manual

3-3 QoS Settings

WAN QoS

QoS (Quality of Service): Sets true bandwidth of your Internet connection to ensure sound quality

during transmission. (When this function is enabled, voice packets have the highest priority to ensure

telecommunication quality while less bandwidth is assigned for data transmission.) Some models of

the VoIP gateway without this function will adjust bandwidth automatically.

ToS/DiffServ (Type of Service/DSCP): Voice packets have the highest priority to ensure

telecommunication quality; the larger the value you set, the higher the priority.

NOTE: Please contact your ISP when you configure these values.

LAN QoS

Priority: The gateway can prioritize LAN ports. Data from HIGH priority port are delivered prior to

those from LOW priority port while they arrive at the same time.

Flow Control: Enable or Disable Flow control.

Incoming Rate Limit: Set the incoming (from WAN to LAN) rate limit of a specific LAN port (can not

exceed the real downstream bandwidth).

Outgoing Rate Limit: Set the outgoing (from LAN to WAN) rate limit of a specific LAN port (can not

exceed the real upstream bandwidth).

D-Link Systems, Inc.

QoS Settings

Dvg-5008s