Table of Contents
Advertisement
BIOS Manual
EPP (Enhanced Parallel Port) to provide asymmetric bidirectional data
transfer driven by the host device. Use ECP (Extended Capabilities
Port) to achieve data transfer rates of up to 2.5 Mbps. ECP uses
the DMA protocol and provides symmetric bidirectional communica
tion.
Note: The Optimal default setting for this option is ECP
and the Fail-Safe setting is Normal .
EPP Version
The settings are 1 . 7 and 1 . 9 .
Fail-Safe default settings are N/A.
Parallel Port IRQ
This option specifies the IRQ to be used by the parallel port. The
settings are 5 and 7 .
Parallel Port DMA Channel
This option is only available if the setting of the parallel port mode op
tion is ECP . The settings are 0 , 1 , 2 , 3 , 5 , 6 and 7 .
Power Loss Control
This option specifies what state the system returns to after losing power.
The settings are Always OFF, Always ON and Previous .
Keyboard Wake-up Function
This option specifies which key will wake up the system when pressed.
The settings are Disable, Ctrl F1 and Space .
Onboard Game & Mini Port
This option is used to either Enable or Disable the Game/Mini Port.
Game Port Base Address
This option specifies the base address to be used for the game port. The
settings are 200h and 208h .
MIDI Port Base Address
This option specifies the base address to be used for the MIDI port. The
settings are 330h, 300h and 298h .
MIDI IRQ
This option specifies the IRQ to be used for the parallel port. The
settings are 5, 7, 9 and 10 .
Note: The Optimal and
4-20
Advertisement
Table of Contents
