Table of Contents
Advertisement
BIOS Manual
CAS# Latency (SCLKS)
This option regulates the column address strobe. The settings for this
option are Auto, 2 or 3 (clocks).
RAS to CAS Delay (SCLKS)
This option specifies the length of the delay inserted between the RAS
(Row Address Strobe) and CAS (Column Address Strobe) signals of the
DRAM system memory access cycle. The settings are Auto (AMIBIOS
automatically determines the optimal delay), 2 or 3 (clocks).
SDRAM RAS# Precharge (SCLKS)
This option specifies the length of the RAS precharge part of the DRAM
system memory access cycle when Synchronous DRAM system memory is
installed in the computer. The settings are Auto (AMIBIOS automatically
determines the optimal precharge time), 2 or 3 (clocks).
Display Cache Window Size
This option specifies the cache size to be used for the display data. The
settings are 32MB and 64MB .
CPU Speed at 100/66 MHz
This option allows you to change the CPU speed. The "Reserved" settings
will cause no change. The other settings list the CPU speeds: the paired
numbers list the CPU speed at 100 and 66 MHz FSB, respectively . The first
number shows the resulting CPU Core/Bus ratio.
Initialize Display Cache Memory
The onboard video included in your motherboard includes a 4 MB onboard
display cache (not available with the 370SWM). When set to Enable , this
cache will be utilized and the following five settings can be accessed. When
Disabled , the cache will not be used and the following five settings are also
disabled.
Paging Mode Control
The settings for this option are Close and Open .
RAS-to-CAS
This option specifies the interval between Refresh signals to DRAM
system memory. The settings for this option are Default and Override .
CAS Latency
This option regulates the speed of the Column Address Strobe (CAS).
The settings are Slow or Fast .
4-10
Advertisement
Table of Contents
