Supermicro SUPER P6SWA User's And Bios Manual page 86

BIOS Manual
Check
Point Description
99 Any initialization required after the option ROM test has
been completed.
printer base address next.
9A Set the timer and printer base addresses.
RS-232 base address next.
9B Returned
Performing
Coprocessor test next.
9C Required initialization before the Coprocessor test is
over. Initializing the Coprocessor next.
9D Coprocessor
initialization after the Coprocessor test next.
9E Initialization after the Coprocessor test is complete.
Checking the extended keyboard, keyboard ID, and
Num Lock key next.
next.
A2 Displaying any soft errors next.
A3 The soft error display has completed.
keyboard typematic rate next.
A4 The keyboard typematic rate is set.
memory wait states next.
A5 Memory wait state programming is over.
screen and enabling parity and the NMI next.
A7 NMI and parity enabled.
required before passing control to the adaptor ROM at
E000 next.
A8 Initialization before passing control to the adaptor ROM
at E000h completed.
ROM at E000h next.
Configuring the timer data area and
after setting the
any required
initialized.
Issuing the keyboard ID command
Performing any initialization
Passing control to the adaptor
B-8
Setting the
RS-232 base
initialization before
Performing any
Setting the
Programming the
Clearing the
address.
the
required