Table of Contents
Advertisement
Chapter 4: BIOS
RTC Alarm Second
This allows you to set a time at which the system will wake-up. The
setting is a number representing the alarm second.
AC97 Logic Resume
This allows you to wake up the system from an AC'97 modem. The settings
for this option are Enabled and Disabled .
USB Controller Resume
This allows you to wake up the system from a USB device. The settings for
this option are Enabled and Disabled .
PME Resume
This allows you to wake up the system from a PME device. The settings for
this option are Enabled and Disabled .
Remote Ring On
This allows you to wake up the system from a serial port modem. The
settings for this option are Enabled and Disabled .
SMBUS Resume
This allows you to wake up the system from a system management bus
device. The settings for this option are Enabled and Disabled .
LAN Wake-Up
This allows you to make use of the Wake-on-LAN feature. The settings for
this option are Enabled and Disabled .
Suspend to RAM Support
This allows you to Enable or Disable the Suspend to RAM feature. The
settings for this option are Enabled and Disabled . Used with ACPI only.
Post Video on S3 Resume
This determines whether or not to invoke the VGA BIOS post when
resuming from STR/S3. The settings for this option are Enabled and
Disabled . Used with ACPI only.
Reset IDE on S3 Resume
This determines whether or not to reset IDE when resuming from STR/S3.
The settings for this option are Enabled and Disabled . Used with ACPI
only.
4-15
Advertisement
Table of Contents
