Table of Contents
Advertisement
BIOS Manual
removed from the pool, the end user can use these options to reserve
the IRQ by assigning an ISA/EISA setting to it. Onboard I/O is configured
by AMIBIOS. All IRQs used by onboard I/O are configured as PCI/PnP.
IRQ14 and 15 will not be available if the onboard PCI IDE is enabled. If all
IRQs are set to ISA/EISA and IRQ14 and 15 are allocated to the onboard
PCI IDE, IRQ 9 will still be available for PCI and PnP devices. This is
because at least one IRQ must be available for PCI and PnP devices. The
settings are PCI/PnP or ISA/EISA. (See page 3-5 for information on
shared IRQs.)
Reserved Memory Size
This option specifies the size of the memory area reserved for legacy ISA
adapter cards. The settings are Disabled , 16K , 32K or 64K .
Reserved Memory Address
This option specifies the beginning address (in hex) of the reserved
memory area. The specified ROM memory area is reserved for use by
legacy ISA adapter cards. The settings are C0000 , C4000 , C8000 ,
CC000 , D0000 , D4000 , D8000 or DC000 .
Peripheral Setup
KB Clock Rate
This setting determines the speed at which characters are repeated
when the key remains depressed. The settings are 6 MHz, 8 MHz, 12
MHz and 16 MHz.
CPU Current Temperature
The current CPU temperature is displayed in this option.
CPU Overheat Warning
The settings for this option are Enabled or Disabled . When set to Enabled
this option allows the user to set an overheat warning temperature.
CPU Overheat Warning Temperature
Use this option to set the CPU overheat warning temperature. The settings
are 25 °C through 75 °C in 1 °C intervals. Note: The Optimal and Fail-Safe
default settings are 55 °C .
H/W Monitor IN0 (CPU1)
H/W Monitor IN2 (+3.3V)
H/W Monitor IN3 (+5V)
4-18
Advertisement
Table of Contents
