Table of Contents
Advertisement
Appendix B: AMIBIOS POST Diagnostic Error Messages
Check
Point
Description
87
The
been completed. Uncompressing the WINBIOS Setup
code and executing the AMIBIOS Setup or WINBIOS
Setup utility next.
88
Returned from WINBIOS Setup and cleared the screen.
Performing any necessary programming after WINBIOS
Setup next.
89
The programming after WINBIOS Setup has been
completed. Displaying the power-on screen message
next.
8B
The first screen message has been displayed.
<WAIT...> message is displayed.
mouse check and extended BIOS data area allocation
check next.
8C
Programming the WINBIOS Setup options next.
8D
The
Resetting the hard disk controller next.
8F
The hard disk controller has been reset.
floppy drive controller next.
91
The
Configuring the hard disk drive controller next.
95
Initializing the bus option ROMs from C800 next.
96
Initializing before passing control to the adaptor ROM at
C800.
97
Initialization before the C800 adaptor
control has been completed.
is next.
98
The adaptor ROM had control and has now returned
control to BIOS POST.
processing after the option ROM returned control.
programming
before
WINBIOS
Setup
floppy
drive
controller
B-7
WINBIOS
Setup
Performing the PS/2
options
are
programmed.
Configuring the
has
been
ROM
The adaptor ROM check
Performing any required
has
The
configured.
gains
Advertisement
Table of Contents
