Srx300 Site Guidelines And Requirements; General Site Installation Guidelines For The Srx300 Firewall - Juniper SRX300 Hardware Manual

RELATED DOCUMENTATION

General Site Installation Guidelines for the SRX300 Firewall | 15

SRX300 Site Guidelines and Requirements

IN THIS SECTION
General Site Installation Guidelines for the SRX300 Firewall | 15
SRX300 Firewall Environmental Specifications | 16
SRX300 Firewall Electrical Wiring Guidelines | 16
SRX300 Firewall Grounding Specifications | 18
SRX300 Firewall Physical Specifications | 19
SRX300 Firewall Clearance Requirements for Airflow and Hardware Maintenance | 20
Rack Requirements | 20
Cabinet Requirements | 21

General Site Installation Guidelines for the SRX300 Firewall

The following precautions help you plan an acceptable operating environment for your SRX300 Firewall
and avoid environmentally caused equipment failures:
• For the operating temperature of the services gateway to be optimal, the airflow around the chassis
must be unrestricted. Allow sufficient clearance between the front and back of the chassis and
adjacent equipment. Ensure that there is adequate circulation in the installation location.
• Follow the ESD procedures to avoid damaging equipment. Static discharge can cause components to
fail completely or intermittently over time. For more information, see
Discharge Damage to the SRX300 Services
NOTE: The SRX300 Firewall does not include a fan and does not generate any acoustic noise.
Preventing Electrostatic
Gateway.
15