The Wbm - Siemens SIMATIC RF186C Operating Instructions Manual

7.2

The WBM

You can use the WBM to configure the SIMATIC RF18xC/RF18xCI communication modules.
NOTICE
Security recommendation: Enable user management
After starting the WBM the first time, no user management is enabled. To make sure that
no unauthorized persons can access the communications module settings, we recommend
that you enable the user management and create new user profiles after the first login.
Note that user administration can only be enabled by an administrator.
During your first login as administrator (User: admin / password: admin), you must change
the password for security reasons.
For further information on logging in to WBM and creating/deleting user profiles, refer to the
section "The "User management" menu item (Page 90)".
NOTICE
Access to the reader
Note that you can simultaneously access a communications module via two browsers but
this is not recommended.
If changes are made when two browsers are accessing a reader at the same time, this can
lead to errors in the configuration or to an undesired result.
When you have created new user profiles you need to log in with one of these user profiles
when you restart the WBM.
SIMATIC RF185C, RF186C, RF188C, RF186CI, RF188CI
Operating Instructions, 06/2019, C79000-G8976-C512-02
Configuring with the WBM
7.2 The WBM
59