Table of Contents
Advertisement
Important Notices
To prevent salt build-up and sticking controls, submerge the
»
empty housing in clean, freshwater. Operate the controls
several times each while underwater to flush out any residue.
Never leave a housing in a rinse tank, even if it is the only
»
system in the tank. Most catastrophic floods happen when the
user walks away from a housing while it is in the rinse tank.
Do not use alcohol, cleaning agents, spray lubricants, Rain-X,
»
or other solvents on the housing or lens port. Use of an
incompatible chemical compound can damage the plastic and
o-rings, and may result in leaking.
Always assemble in a cool, dry location. Opening the housing
»
in a humid environment will lead to fogging.
3
Advertisement
Table of Contents
