Table of Contents
Advertisement
3. Orient the diffuser as shown.
4. Remove the diffuser by pulling it away from the port.
A small hole in the corner of the flash diffuser allows it to be
»
attached to your system using a thin string (not included). It
is recommended to attach the flash diffuser to your system to
avoid accidental loss.
Setting Up An External Strobe
We recommend attaching an external strobe for the optimal color and
clarity in a wide variety of photographic situations, including daylight
photography.
This housing provides fiber optic ports for optical triggering of up to
two strobes.
Using the Flash Deflector
Install the opaque white flash deflector when using external strobes.
The flash deflector improves transmission of light to the fiber optic
ports and reduces unwanted backscatter (the illumination of particles
in the water).
13
Advertisement
Table of Contents
