Table of Contents
Advertisement
Clearing a Media Jam
1
Switch OFF the plotter, open the window and raise the media
lever.
Off
W A R N I N G
C A U T I O N
2
Carefully move the cartridge carriage out of the way.
If the plotter was cutting when it jammed, the cutter carriage
will move with it.
3
Carefully remove any of the jammed media which you can
easily lift up and out.
4
Carefully pull the rest of the roll or sheet down and out of
the media entry slot.
5
Lower the window and the lever and switch on the plotter.
Press the
Form Feed and Cut
still in the media path.
6
Reload the media
Don't touch the stainless steel strip behind the
cartridge carriage; it is very sharp. Keep hair,
jewelry, clothing, and foreign objects away
from plotter mechanisms.
When moving the cartridge carriage, touch
only the black plastic parts.
key to eject any pieces of media
14
Media lever
1867
Advertisement
Table of Contents
