Calibrating The Sensor - Toro Groundsmaster 7200 Installation Instructions Manual

Note:
Ensure the harnesses are secured away
from moving parts and hot surfaces.
5. Connect the battery. Refer to the Operator's
Manual for the procedure.
Installing the Decal
Install the decal on the machine as shown in
1. Decal

Calibrating the Sensor

1. While on a flat surface, remove the plug from
the calibration connectors
2. Plug the calibration connectors together as
shown in Figure
Figure 9
(Figure 10).
10.
Figure 9.
g320857
1. Calibration connectors
3. Turn the ignition key to the O
not start the engine.
6
Figure 10
2. Plug
position, but do
N
g321003
g321004