Toro Groundsmaster 7200 Installation Instructions Manual page 3

Figure 1
1. 5 cm (2 inches)
2. Mounting bracket
g320860
3. Drill 9/32 inch diameter
holes.
4. Check here for existing
holes.
4. Using the mounting bracket as a template, mark
the location of the hole to drill
5. Drill 9/32 inch holes into the machine frame
(Figure 1).
6. Install the mounting bracket to the machine
frame with 2 bolts (1/4 x 3/4 inch) and 2 flange
nuts (1/4 inch).
3
(Figure 1).