Toro Groundsmaster 7200 Installation Instructions Manual page 4

Figure 2
1. Flange nut (1/4 inch)
2. Mounting bracket
7. Mount the sensor to the mounting bracket with 2
bolts (1/4 x 1-1/4 inch) and 2 nuts (1/4 inch).
Figure 3
1. Bolt (1/4 x 1-1/4 inch)
2. Flange nut (1/4 inch)
8. Plug the 90° connector into the sensor
and Figure 8).
g320859
3. Bolt (1/4 x 3/4 inch)
g320856
3. Sensor
(Figure 4
1. 90° connector
9. Flip the seat forward.
10. Remove the access panel behind the seat and
on the side of the console
11. Install the alarm to the console panel
4
Figure 4
(Figure 5).
Figure 5
(Figure
g321005
g320861
6).