Operation
Use the following procedures depending what your
machine has installed.
WARNING
Slopes are a major factor related to
loss-of-control and tip-over accidents, which
can result in severe injury or death.
Use extreme caution when operating the
machine on a slope.
Using the Slope Sensor
with the LED Light
The light and alarm indicates the severity of the slope
(Figure
11):
•
No light—normal operating conditions
•
Slow, flashing red light—moderate slope
•
Fast, flashing red light and audible alarm—steep
slope; proceed to a more shallow slope.
Using the Slope Sensor
with an InfoCenter
The light and alarm indicates the severity of the slope
(Figure
12):
•
No light—normal operating conditions
•
Slow, flashing red light and Advisory 196 displaying
on the screen—moderate slope
Advisory 196
•
Fast, flashing red light, audible alarm, and
Advisory 197 displaying on the screen—steep
slope; proceed to a more shallow slope.
Figure 14
g317557
8
Figure 15
Advisory 197
g317558