Download
Share
Print this page
Stryker KAPADO Series Maintenance Manual
  1. Manuals
  2. Brands
  3. Stryker Manuals
  4. Medical Equipment
  5. KAPADO Series
  6. Maintenance manual

Stryker KAPADO Series Maintenance Manual

Stretcher
Hide thumbs

Advertisement

Quick Links

Download this manual
K K A A P P A A D D O O a a n n d d K K A A P P A A D D O O - - X X S S e e r r i i e e s s S S t t r r e e t t c c h h e e r r
M M a a i i n n t t e e n n a a n n c c e e M M a a n n u u a a l l
6350
EN
SK 6350 Rev 03
2021/01

Advertisement

loading

Related Manuals for Stryker KAPADO Series

Summary of Contents for Stryker KAPADO Series

  • Page 1 K K A A P P A A D D O O a a n n d d K K A A P P A A D D O O - - X X S S e e r r i i e e s s S S t t r r e e t t c c h h e e r r M M a a i i n n t t e e n n a a n n c c e e M M a a n n u u a a l l 6350 SK 6350 Rev 03...
  • Page 3 Caution Warning; crushing of hands No pushing Do not lubricate Catalogue number Serial number For US Patents see www.stryker.com/patents CE mark Authorized representative in the European Community European medical device Manufacturer (XXXX indicates year of manufacture) Safe working load Maximum patient weight...
  • Page 4 Do not tumble dry Do not dry clean Do not iron Allow to completely air dry Chlorinated bleach Lubricate SK 6350 Rev 03...
  • Page 5 T T a a b b l l e e o o f f C C o o n n t t e e n n t t s s Warning/Caution/Note Definition ..........................3 Summary of safety precautions ..........................4 Pinch points................................4 Introduction ................................5 Product Description..............................5...
  • Page 6 Right latch spindle assembly - YM-500-009 ......................64 Corner cover assembly ............................65 Covers assembly, no options, head end ........................67 Covers assembly with IV pole and pop-up push handles, head end ..............68 Defibrillator tray assembly ............................69 Two-stage IV pole assembly ..........................70 Three-stage IV pole assembly ..........................71 Push handle assembly, head end ..........................72...
  • Page 7 W W a a r r n n i i n n g g / / C C a a u u t t i i o o n n / / N N o o t t e e D D e e f f i i n n i i t t i i o o n n The words W W A A R R N N I I N N G G , C C A A U U T T I I O O N N , and N N O O T T E E carry special meanings and should be carefully reviewed.
  • Page 8 S S u u m m m m a a r r y y o o f f s s a a f f e e t t y y p p r r e e c c a a u u t t i i o o n n s s Always read and strictly follow the warnings and cautions listed on this page.
  • Page 9 I I n n t t r r o o d d u u c c t t i i o o n n This manual assists you with the operation or maintenance of your Stryker product. Read this manual before operating or maintaining this product.
  • Page 10 • This product is not suitable for use in the presence of a flammable anesthetic mixture with air or with oxygen or nitrous oxide. • Specifications listed are approximate and may vary slightly from product to product. Stryker reserves the right to change specifications without notice. SK 6350 Rev 03...
  • Page 11 O O p p e e r r a a t t i i o o n n S S t t o o r r a a g g e e a a n n d d t t r r a a n n s s p p o o r r t t a a t t i i o o n n E E n n v v i i r r o o n n m m e e n n t t a a l l c c o o n n d d i i t t i i o o n n s s 100 °F 122 °F...
  • Page 12 P P r r o o d d u u c c t t i i l l l l u u s s t t r r a a t t i i o o n n Brake/steer control pedal Pump pedal Caster Siderail...
  • Page 13 Web: www.stryker.com To view your operations or maintenance manual online, see https://techweb.stryker.com/. Have the serial number (A) of your Stryker product available when calling Stryker Customer Service or Technical Support. Include the serial number in all written communication. SK 6350 Rev 03...
  • Page 14 S S e e r r i i a a l l n n u u m m b b e e r r l l o o c c a a t t i i o o n n F F i i g g u u r r e e 3 3 –...
  • Page 15 Remove product from service before you perform the preventive maintenance inspection. Check all items listed during annual preventive maintenance for all Stryker Medical products. You may need to perform preventive maintenance checks more often based on your level of product usage. Service only by qualified personnel.
  • Page 16 Hydraulic release pedals are not loose or damaged Jack release valve is free of dust, debris, does not stick Jack linkages are not out of adjustment or damaged Jack adjustment valves and spring work Jacks are not damaged Head end and foot end jacks raise and lower at the same time Litter raises and lowers from all locations Litter components are in place and not damaged (fastener, holding pin, pin, bushing not backing out, loose, worn out, or damaged)
  • Page 17 R R e e t t r r a a c c t t a a b b l l e e f f i i f f t t h h w w h h e e e e l l l l u u b b r r i i c c a a t t i i o o n n T T o o o o l l s s r r e e q q u u i i r r e e d d : : •...
  • Page 18 Q Q u u i i c c k k r r e e f f e e r r e e n n c c e e r r e e p p l l a a c c e e m m e e n n t t p p a a r r t t s s These parts are currently available for purchase. Call Stryker Customer Service: + 90 (352) 321 43 00 (pbx) for availability and pricing.
  • Page 19 K K i i t t n n a a m m e e N N u u m m b b e e r r K K i i t t c c o o n n t t e e n n t t s s Q Q u u a a n n t t i i t t y y N N u u m m b b e e r r N N a a m m e e...
  • Page 20 K K i i t t n n a a m m e e N N u u m m b b e e r r K K i i t t c c o o n n t t e e n n t t s s Q Q u u a a n n t t i i t t y y N N u u m m b b e e r r N N a a m m e e...
  • Page 21 K K i i t t n n a a m m e e N N u u m m b b e e r r K K i i t t c c o o n n t t e e n n t t s s Q Q u u a a n n t t i i t t y y N N u u m m b b e e r r N N a a m m e e...
  • Page 22 K K i i t t n n a a m m e e N N u u m m b b e e r r K K i i t t c c o o n n t t e e n n t t s s Q Q u u a a n n t t i i t t y y N N u u m m b b e e r r N N a a m m e e...
  • Page 23 K K i i t t n n a a m m e e N N u u m m b b e e r r K K i i t t c c o o n n t t e e n n t t s s Q Q u u a a n n t t i i t t y y N N u u m m b b e e r r N N a a m m e e...
  • Page 24 K K i i t t n n a a m m e e N N u u m m b b e e r r K K i i t t c c o o n n t t e e n n t t s s Q Q u u a a n n t t i i t t y y N N u u m m b b e e r r N N a a m m e e...
  • Page 25 K K i i t t n n a a m m e e N N u u m m b b e e r r K K i i t t c c o o n n t t e e n n t t s s Q Q u u a a n n t t i i t t y y N N u u m m b b e e r r N N a a m m e e...
  • Page 26 K K i i t t n n a a m m e e N N u u m m b b e e r r K K i i t t c c o o n n t t e e n n t t s s Q Q u u a a n n t t i i t t y y N N u u m m b b e e r r N N a a m m e e...
  • Page 27 K K i i t t n n a a m m e e N N u u m m b b e e r r K K i i t t c c o o n n t t e e n n t t s s Q Q u u a a n n t t i i t t y y N N u u m m b b e e r r N N a a m m e e...
  • Page 28 S S e e r r v v i i c c e e R R a a i i s s i i n n g g t t h h e e h h o o o o d d T T o o o o l l s s r r e e q q u u i i r r e e d d : : •...
  • Page 29 3. Raise the product to the highest position. 4. Raise both siderails to the up and latched position. 5. Use a #2 Phillips screwdriver to remove the flush head plastic rivet (C) that secure the base hood (A) to the hood retainer (Figure 5).
  • Page 30 5. Remove and save the caster lock link part weldment (C), washers (E, AP), caster fixing part (J), bearing (K), and bushing (F). 6. Apply the brake. Push on the product to make sure that the brake is working. 7. Use a small jack to raise the product until the caster (H, I) falls out of the frame socket. 8.
  • Page 31 Torque item Q to 15-18 Nm F F i i g g u u r r e e 8 8 – – B B r r a a k k e e r r o o d d r r e e p p l l a a c c e e m m e e n n t t 4.
  • Page 32 N N o o t t e e - - When you reinstall the hex head screw (P) make sure that you use a 3/8” drive torque wrench (Nm) to torque the screw to 15-18 Nm. Torque item P to 15-18 Nm F F i i g g u u r r e e 1 1 0 0 –...
  • Page 33 • 5 mm hex key • #2 Phillips screwdriver P P r r o o c c e e d d u u r r e e : : 1. Apply the brake. Push on the product to make sure that the brake is working. 2.
  • Page 34 10. Reinstall the pump connecting rod and release rod (removed in steps 5 and 7). N N o o t t e e - - The jack descent rate is set at the factory. Do not adjust the rate. 11. Press the pump pedal to the floor to position the jack on the base frame. 12.
  • Page 35 F F i i g g u u r r e e 1 1 2 2 – – P P u u m m p p p p e e d d a a l l r r e e p p l l a a c c e e m m e e n n t t 3.
  • Page 36 F F i i g g u u r r e e 1 1 3 3 – – R R e e l l e e a a s s e e p p e e d d a a l l a a d d j j u u s s t t m m e e n n t t 3.
  • Page 37 2. Use needle nose pliers to remove the rue clips (M) and disconnect the release rods (AK, AL) from the release pedal assembly (AH) (Figure 13). 3. Use a 13 mm socket wrench with a 3/8” drive extension and a 3/8” drive ratchet to remove the hex head bolts (Q) that secure the release pedal assembly (AH).
  • Page 38 Torque item A to 15-18 Nm Torque item A to 15-18 Nm F F i i g g u u r r e e 1 1 5 5 – – L L i i t t t t e e r r t t o o p p r r e e m m o o v v a a l l , , S S T T 1 1 - - X X F F i i g g u u r r e e 1 1 4 4 –...
  • Page 39 Torque item A to 15-18 Nm F F i i g g u u r r e e 1 1 6 6 – – S S i i d d e e r r a a i i l l l l a a t t c c h h r r e e p p l l a a c c e e m m e e n n t t 4.
  • Page 40 F F i i g g u u r r e e 1 1 7 7 – – X X - - r r a a y y c c a a s s s s e e t t t t e e p p a a n n e e l l r r e e p p l l a a c c e e m m e e n n t t - - h h e e a a d d e e n n d d 6.
  • Page 41 F F i i g g u u r r e e 1 1 8 8 – – X X - - r r a a y y c c a a s s s s e e t t t t e e p p a a n n e e l l r r e e p p l l a a c c e e m m e e n n t t - - f f o o o o t t e e n n d d 7.
  • Page 42 Torque item G to 8-10 Nm F F i i g g u u r r e e 1 1 9 9 – – F F o o w w l l e e r r g g a a s s c c y y l l i i n n d d e e r r r r e e p p l l a a c c e e m m e e n n t t 9.
  • Page 43 B B a a s s e e a a s s s s e e m m b b l l y y YM-600-000 (Reference only) Torque item D to 8-10 Nm Torque item L to 15-18 Nm SK 6350 Rev 03...
  • Page 44 Torque item P to 15-18 Nm Torque item Q to 15-18 Nm Torque item P to 15-18 Nm SK 6350 Rev 03...
  • Page 45 Torque item Q to 15-18 Nm Torque item Q to 15-18 Nm Torque item AF to 8-10 Nm SK 6350 Rev 03...
  • Page 46 Torque item Q to 15-18 Nm Torque item Q to 8-10 Nm SK 6350 Rev 03...
  • Page 47 I I t t e e m m N N u u m m b b e e r r N N a a m m e e Q Q u u a a n n t t i i t t y y YM-660-047 Base weldment YM-660-160...
  • Page 48 I I t t e e m m N N u u m m b b e e r r N N a a m m e e Q Q u u a a n n t t i i t t y y YM-660-037 Pump pedal assembly ( Pump pedal assembly - YM-660-037 (page 49))
  • Page 49 B B r r a a k k e e r r o o d d a a s s s s e e m m b b l l y y - - Y Y M M - - 6 6 6 6 0 0 - - 3 3 2 2 0 0 I I t t e e m m N N u u m m b b e e r r N N a a m m e e...
  • Page 50 F F i i f f t t h h w w h h e e e e l l a a s s s s e e m m b b l l y y - - Y Y M M - - 6 6 6 6 0 0 - - 1 1 2 2 3 3 Torque item AC to 8-10 Nm Torque item Y to...
  • Page 51 I I t t e e m m N N u u m m b b e e r r N N a a m m e e Q Q u u a a n n t t i i t t y y HM-12-030 Cam pivot block HM-01-67...
  • Page 52 L L o o w w e e r r i i n n g g p p e e d d a a l l a a s s s s e e m m b b l l y y - - Y Y M M - - 6 6 6 6 0 0 - - 3 3 1 1 5 5 I I t t e e m m N N u u m m b b e e r r N N a a m m e e...
  • Page 53 P P u u m m p p p p e e d d a a l l a a s s s s e e m m b b l l y y - - Y Y M M - - 6 6 6 6 0 0 - - 0 0 3 3 7 7 I I t t e e m m N N u u m m b b e e r r N N a a m m e e...
  • Page 54 L L i i t t t t e e r r f f r r a a m m e e a a s s s s e e m m b b l l y y , , S S T T 1 1 - - X X o o p p t t i i o o n n Torque item H to 15-18 Nm Torque item G...
  • Page 55 L L i i t t t t e e r r m m a a t t t t r r e e s s s s h h o o o o k k I I t t e e m m N N u u m m b b e e r r N N a a m m e e Q Q u u a a n n t t i i t t y y...
  • Page 56 L L i i t t t t e e r r a a s s s s e e m m b b l l y y , , K K A A P P A A D D O O - - X X o o p p t t i i o o n n Torque item A to 15-18 Nm DETAIL A...
  • Page 57 I I t t e e m m N N u u m m b b e e r r N N a a m m e e Q Q u u a a n n t t i i t t y y HM-12-041 Sleeve HM-11-33...
  • Page 58 F F o o w w l l e e r r a a s s s s e e m m b b l l y y , , K K A A P P A A D D O O - - X X o o p p t t i i o o n n I I t t e e m m N N u u m m b b e e r r N N a a m m e e...
  • Page 59 P P r r o o f f i i l l e e c c a a p p a a n n d d F F o o w w l l e e r r g g u u i i d d e e p p a a r r t t a a s s s s e e m m b b l l y y , , S S T T 1 1 - - X X o o p p t t i i o o n n Torque item C to 15-18 Nm Torque item B...
  • Page 60 L L e e f f t t s s i i d d e e r r a a i i l l a a s s s s e e m m b b l l y y , , S S T T 1 1 - - X X o o p p t t i i o o n n - - Y Y M M - - 5 5 0 0 0 0 - - 0 0 0 0 2 2 Torque item A to 8-10 Nm Torque item A...
  • Page 61 I I t t e e m m N N u u m m b b e e r r N N a a m m e e Q Q u u a a n n t t i i t t y y YM-500-006 Left spindle assembly - YM-500-006 (page 61)
  • Page 62 R R i i g g h h t t s s i i d d e e r r a a i i l l a a s s s s e e m m b b l l y y , , S S T T 1 1 - - X X o o p p t t i i o o n n - - Y Y M M - - 5 5 0 0 0 0 - - 0 0 0 0 3 3 Torque item A to 8-10 Nm Torque item A...
  • Page 63 L L e e f f t t s s i i d d e e r r a a i i l l l l a a t t c c h h a a s s s s e e m m b b l l y y - - Y Y M M - - 5 5 0 0 0 0 - - 0 0 0 0 8 8 I I t t e e m m N N u u m m b b e e r r N N a a m m e e...
  • Page 64 R R i i g g h h t t s s i i d d e e r r a a i i l l l l a a t t c c h h a a s s s s e e m m b b l l y y - - Y Y M M - - 5 5 0 0 0 0 - - 0 0 1 1 2 2 I I t t e e m m N N u u m m b b e e r r N N a a m m e e...
  • Page 65 L L e e f f t t s s p p i i n n d d l l e e a a s s s s e e m m b b l l y y - - Y Y M M - - 5 5 0 0 0 0 - - 0 0 0 0 6 6 I I t t e e m m N N u u m m b b e e r r N N a a m m e e...
  • Page 66 R R i i g g h h t t s s p p i i n n d d l l e e a a s s s s e e m m b b l l y y - - Y Y M M - - 5 5 0 0 0 0 - - 0 0 1 1 0 0 I I t t e e m m N N u u m m b b e e r r N N a a m m e e...
  • Page 67 L L e e f f t t l l a a t t c c h h s s p p i i n n d d l l e e a a s s s s e e m m b b l l y y - - Y Y M M - - 5 5 0 0 0 0 - - 0 0 0 0 7 7 I I t t e e m m N N u u m m b b e e r r N N a a m m e e...
  • Page 68 R R i i g g h h t t l l a a t t c c h h s s p p i i n n d d l l e e a a s s s s e e m m b b l l y y - - Y Y M M - - 5 5 0 0 0 0 - - 0 0 0 0 9 9 I I t t e e m m N N u u m m b b e e r r N N a a m m e e...
  • Page 69 C C o o r r n n e e r r c c o o v v e e r r a a s s s s e e m m b b l l y y Torque item A to 15-18 Nm I I t t e e m m N N u u m m b b e e r r...
  • Page 70 I I t t e e m m N N u u m m b b e e r r N N a a m m e e Q Q u u a a n n t t i i t t y y YM-500-153-BY Bumper weldment assembly HM-05-057...
  • Page 71 C C o o v v e e r r s s a a s s s s e e m m b b l l y y , , n n o o o o p p t t i i o o n n s s , , h h e e a a d d e e n n d d I I t t e e m m N N u u m m b b e e r r N N a a m m e e...
  • Page 72 C C o o v v e e r r s s a a s s s s e e m m b b l l y y w w i i t t h h I I V V p p o o l l e e a a n n d d p p o o p p - - u u p p p p u u s s h h h h a a n n d d l l e e s s , , h h e e a a d d e e n n d d I I t t e e m m N N u u m m b b e e r r N N a a m m e e...
  • Page 73 D D e e f f i i b b r r i i l l l l a a t t o o r r t t r r a a y y a a s s s s e e m m b b l l y y I I t t e e m m N N u u m m b b e e r r N N a a m m e e...
  • Page 74 T T w w o o - - s s t t a a g g e e I I V V p p o o l l e e a a s s s s e e m m b b l l y y Torque item G to 15-18 Nm I I t t e e m m...
  • Page 75 T T h h r r e e e e - - s s t t a a g g e e I I V V p p o o l l e e a a s s s s e e m m b b l l y y Torque item G to 15-18 Nm I I t t e e m m...
  • Page 76 P P u u s s h h h h a a n n d d l l e e a a s s s s e e m m b b l l y y , , h h e e a a d d e e n n d d Torque item A to 15-18 Nm I I t t e e m m...
  • Page 77 S S T T 1 1 b b a a s s i i c c m m a a t t t t r r e e s s s s 8 8 c c m m - - 6 6 3 3 0 0 0 0 - - 0 0 - - 1 1 0 0 0 0 1930 SK 6350 Rev 03...
  • Page 78 S S T T 1 1 b b a a s s i i c c m m a a t t t t r r e e s s s s 1 1 0 0 c c m m - - 6 6 3 3 0 0 0 0 - - 0 0 - - 1 1 0 0 2 2 SK 6350 Rev 03...
  • Page 79 S S T T 1 1 m m a a t t t t r r e e s s s s w w i i t t h h f f l l a a m m e e b b a a r r r r i i e e r r 8 8 c c m m - - 6 6 3 3 0 0 0 0 - - 0 0 - - 1 1 0 0 3 3 1930 SK 6350 Rev 03...
  • Page 80 S S T T 1 1 m m a a t t t t r r e e s s s s w w i i t t h h f f l l a a m m e e b b a a r r r r i i e e r r 1 1 0 0 c c m m - - 6 6 3 3 0 0 0 0 - - 0 0 - - 1 1 0 0 4 4 SK 6350 Rev 03...
  • Page 82 Stryker Medical 3800 E. Centre Avenue Portage, MI 49002 SK 6350 Rev 03 2021/01 WCR: AC.3...

This manual is also suitable for:

Kapado-x series6350