Euroboor ECO.60S+ User Manual

Euroboor ECO.60S+ User Manual

Magnetic drilling machine

Advertisement

Quick Links

User manual
V 1.0 EN
Magnetic drilling machine
with standard electromagnet

ECO.60S+

Serial number:
Date of purchase:
/
/
Don't forget to register your machine at:
www.euroboor.com/register
[ only when registered you benefit from extended warranty ]

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the ECO.60S+ and is the answer not in the manual?

Questions and answers

Subscribe to Our Youtube Channel

Summary of Contents for Euroboor ECO.60S+

  • Page 1: Eco.60S

    User manual V 1.0 EN Magnetic drilling machine with standard electromagnet ECO.60S+ Serial number: Date of purchase: Don’t forget to register your machine at: www.euroboor.com/register [ only when registered you benefit from extended warranty ]...
  • Page 2 Congratulations on purchasing this premium magnetic drilling machine. At Euroboor we strive to exceed our customers’ expectations by developing and providing premium and innovative portable drilling and cutting solutions. We believe that a professional like you must be able to rely on a professional supplier.
  • Page 3: Table Of Contents

    Table of contents ECO.60S+ ............................. 1 Table of contents ......................... 3 1. Safety ............................4 1.1 General safety instructions ......................4 1.2 Specific safety information ......................6 2. Description ..........................8 2.1 Intended use ..........................8 2.2 Description and features ....................... 8 2.3 Case content ..........................
  • Page 4: Safety

    1. Safety 1.1 General safety instructions Do not use this magnetic drilling machine before you have thoroughly read and completely understood this manual, specifically the “General safety instructions” and ‘’Specific safety information’’ , including the figures, specifications, safety regulations and the signs indicating DANGER, WARNING and CAUTION.
  • Page 5 If you detect damage have the machine serviced before use. Many accidents are caused by poorly maintained tools; 10. Only use accessories that are recommended by Euroboor for your machine model. Accessories that are suitable for one machine may become hazardous when used on another...
  • Page 6: Specific Safety Information

    • Always use the recommended speed for the accessories and material you are working with; • Do not use the machine on the same workpiece on which electric welders are working; • Only use an appropriate cutting lubricant. Euroboor offers a wide range of well-considered cooling and lubrication products to match your requirements;...
  • Page 7 Residual risk In spite of following the relevant safety regulations and their implementation, certain residual risks cannot be avoided. These are: Impairment of hearing; • Risk of personal injury from flying particles; • Risk of burns due to accessories becoming hot during operation; •...
  • Page 8: Description

    Euroboor. The magnetic drilling machine can be used horizontally, vertically or overhead. 2.2 Description and features...
  • Page 9: Case Content

    Additional serial no. stickers are provided with the machine for your administration. The serial number will help you, your dealer and Euroboor to validate and identify the machine. For example:...
  • Page 10: Technical Data

    2.5 Technical data Metric Imperial Ø 12 - 60 mm Ø 7/16" - 2 3/8" Annular cutting Twist drilling Ø 1 - 23 mm Ø 1/16" - 15/16" Threading Countersinking Ø 10 - 65 mm Ø 3/8" - 2 9/16" Length 320 mm 12 5/8"...
  • Page 11: Symbols

    2.6 Symbols Symbol Term, meaning Explanation Be absolutely sure to read the documentation in Read documentation this user manual and specifically the “General safety instructions” and ‘’Specific safety information’’. Wear ear protection Use ear protection during operation. Wear eye protection Use eye protection during operation.
  • Page 12: Environmental

    2.7 Environmental Separate collection. This product must not be disposed of with normal household waste. Separate collection of used products and packaging allows materials to be recycled and used again. Re-use of recycled materials helps prevent environmental pollution and reduces the demand for raw materials.
  • Page 13: Preparation & Adjustment

    1. Make sure the flow regulator is closed; 2. Unscrew the cap; 3. Fill the container with cutting fluid; 4. Screw the cap back on. WARNING: Do not use the lubrication system in vertical or overhead drilling applications. Instead use Euroboor cutting paste.
  • Page 14: Prior To Use

    Your Euroboor magnetic drilling machine is designed in class I (grounded) according to EN 61029-1. Earth wire is required. If the supply cord is damaged, it must be replaced by a specially prepared cord available at Euroboor or your Euroboor dealer.
  • Page 15 Useful tips: – Try a few simple projects using scrap material until you develop a ‘’feel’’ for the magnetic drilling machine; – Let the machine run in for a period of eight to ten hours before starting with big operations. Do not load the machine too much during this run-in period;...
  • Page 16: Using The Machine

    4. Using the machine WARNING: Always observe the safety instructions and applicable regulations. WARNING: To reduce the risk of serious personal injury, turn the machine off and disconnect the machine from power source before making any adjustments or removing/installing attachments or accessories. 4.1 Control panel The control panel on your magnetic drilling machine is designed for maximum ease of use and safety.
  • Page 17: Morse Taper Spindle

    4.2 Morse taper spindle [image 4-2] [image 4-3] 1. Make sure the inside of the output shaft and the Morse taper spindle are clean and free of grease; 2. Align the lubricator ring rotation limiter with the recess in the gearbox (A); 3.
  • Page 18: Electromagnet

    3. Speed selection for annular cutters (also see plate on gearbox): o Ø 27-60 mm (1 1/16" - 2") Speed 60-275 rpm; oo Ø 12-26 mm (1/2" - 1") Speed 100-500 rpm. [image 4-4] WARNING: never touch moving machine parts! 4.4 Electromagnet Make sure the magnetic drilling machine is placed on a smooth, clean, level and solid surface without any objects or debris to guarantee maximum adhesion.
  • Page 19: Switching Motor On And Off

    We want to point out that above mentioned precautions and indicators do not guarantee that the magnet will not release from the material. Euroboor accepts no liability when it comes to the magnet indicator not functioning or functioning poorly.
  • Page 20: Gyro-Tec Safety

    4.7 GYRO-TEC safety This Euroboor magnetic drilling machine is equipped with GYRO-TEC safety functionality. It features a gyroscopic sensor which detects acceleration and displacement in any direction. Whenever the machine recognizes a sudden or unwanted movement the motor will be shut down automatically by the machine’s electronics.
  • Page 21: Overheat Protection

    * Disclaimer: Euroboor is not liable for any damage caused to the machine due to electrical problems in the workplace. Above mentioned protection is not guaranteed in all cases of voltage and frequency spikes or fluctuations. Euroboor accepts no liability when it comes to the power surge or fluctuation protection not functioning or functioning poorly.
  • Page 22: Tool Lubrication

    WARNING: Do not use the lubrication system in vertical or overhead drilling applications. Instead use Euroboor cutting paste. Make sure to use only suitable cutting lubricants. Euroboor offers a wide range of cutting lubricants for all tool and material combinations. Proper lubrication will help you create better and faster...
  • Page 23: Working With Drilling Accessories

    5. Working with drilling accessories 5.1 Annular cutters Annular cutters only cut material at the periphery of the hole, rather than converting the entire hole to shavings. As a result, the energy required to make a hole is lower than for a twist drill. When drilling with an annular cutter, it is not necessary to drill a pilot hole.
  • Page 24 4. Switch on the magnet and verify that the drill is in the right position and that the machine is pushed tight against the work piece; 5. Put open the valve to release the oil; 6. Switch the motor on and allow it to run at the required speed; 7.
  • Page 25: Twist Drills

    5.2 Twist drills 1. Remove the Morse taper arbor (see paragraph 4.3 Gearbox); 2. Fit the twist drill; a. Straight shank twist drills; [image 5-2]...
  • Page 26: Countersinks

    b. Morse taper shank twist drills; [image 5-3] Morse taper 2 [image 5-4] Morse taper 3 3. Precisely mark the center of the hole, and use the tip of the twist drill to position the machine in the correct position, with the tip of the twist drill to meet the marked center of the hole.
  • Page 27: Maintenance

    6. Maintenance Your Euroboor magnetic drilling machine has been designed to operate over a long period of time. Continuous satisfactory operation depends upon proper tool care and regular cleaning. CAUTION: To reduce the risk of injury, turn the machine off and disconnect machine from power source before installing and removing accessories, before adjusting or changing set- ups or when making repairs.
  • Page 28 Repair, modification and inspection of Euroboor Magnetic drilling machines must be done by Euroboor or an Euroboor authorised dealer. The spare parts list will be helpful if presented with the machine to the Euroboor dealer for service when requesting repair or other maintenance.
  • Page 29: Trouble Shooting

    7. Trouble shooting Magnet and motor do not - The magnet switch is not connected to the power supply function - Damaged or defective wiring - Defective fuse - Defective magnet switch - Defective control unit - Defective power supply Magnet does function, the motor - Damaged or defective wiring does not work...
  • Page 30 Frame under voltage - Damaged / defective wiring - Defective magnet - Motor seriously dirty Fuse blows when magnet switch is - Damaged or defective wiring turned on - Wrong value fuse - Defective magnet switch - Defective control unit - Defective magnet Fuse blows when motor is started - Damaged or defective wiring...
  • Page 31: Exploded Views & Spare Parts List

    8. Exploded views & spare parts list 8.1 Exploded views...
  • Page 34: Spare Parts List

    8.2 Spare parts list No. Part no. Description No. Part no. Description 41 050.0078 Ring 41.5 x 36.5 x 1.5 ECO.60S+ motor unit 060.1001Z 220V ext. cable 42 050.1014 Gear switch ECO.60S+ motor unit 43 050.0081 O-ring 060.1001ZA 110V ext. cable 44 050.0025 Pin 4 x 10 050.0106...
  • Page 35 No. Part no. Description No. Part no. Description 020.0036 Main cable 220V EU 94 020.0016 Fuse holder 020.0036/AU Main cable Australia 95 020.0112 Washer M6 020.0036/UK Main cable UK 220v 96 055.1041 Gyroscope PCB set 020.0036/UK 060.1022 Magnet 220 Volt Main cable UK 110v 16A 110-16A 060.1022A...
  • Page 36: Wiring Diagram

    8.3 Wiring diagram...
  • Page 37: Warranty And Service

    Service To maximise the lifetime of your Euroboor machine always use service and parts from an official Euroboor distribution channel. Whenever in need of such, always contact original point of sales or if no longer existent the distributor of Euroboor products in your country.

This manual is also suitable for:

F120068315

Table of Contents