4.11 Tool lubrication
In horizontal applications
In order to use the lubrication system, the tank must be filled with a cutting lubricant:
1. Make sure the flow regulator is closed;
2. Unscrew the cap;
3. Fill the container with cutting lubricant;
4. Screw the cap back on.
Adjust the fluid flow as required using the flow regulator;
•
Add more cutting lubricant when the shavings (metal chips) become blue.
•
Vertical and overhead applications
Dip the cutter in cutting paste or apply an appropriate spray.
WARNING: Do not use the lubrication system in vertical or overhead drilling applications.
Instead use Euroboor cutting paste.
Make sure to use only suitable cutting lubricants. Euroboor offers a wide range of cutting lubricants
for all tool and material combinations. Proper lubrication will help you create better and faster
results, and extend the lifetime of your tools.
22