Supermicro X10DSC-TP4S User Manual page 89

Super X10DSC-TP4S Motherboard User's Manual
PCI Devices Option ROM Settings
Slot1 PCI-E OPROM
Use this item to select the Option ROM type for a device installed on PCI-E Slot1
for system boot. The options are Disabled, Legacy, and EFI.
Onboard Video Option ROM
Use this item to select the Option ROM type for the onboard video device for
system boot. The options are Disabled, Legacy, and EFI.
VGA Priority
Use this item to select the graphics device to be used as the primary video display
for system boot. The options are Onboard and Offboard.
Onboard LAN OPROM Type
This item allows the user to select Option ROM type for the network (LAN) con-
nections. The options are Legacy and EFI.
Onboard LAN1 OPROM (Option ROM)/Onboard LAN2 OPROM (Option
ROM)/Onboard LAN3 OPROM (Option ROM)/Onboard LAN4 OPROM (Option
ROM)
Use this item to select the type of device installed in a LAN port specified by the
user for system boot. The default setting for LAN1 Option ROM is Enabled. The
default settings for LAN2-LAN4 Option ROMs are Disabled.
Onboard SAS OPROM Type
Use this item to select the Option ROM type for the SAS device specified by the
user for system boot. The options are Disabled, Legacy, and EFI.
Network Stack
Select Enabled to enable PXE (Preboot Execution Environment) or UEFI (Unified
Extensible Firmware Interface) for network stack support. The options are Dis-
abled and Enabled. If this item is set to Enabled, the following items will display:
IPv4 PXE Support (Available when Network Stack is set to Enabled)
Set this item to Enabled to activate IPv4 PXE Support. The options are Enabled
and Disabled.
IPv6 PXE Support (Available when Network Stack is set to Enabled)
Set this item to Enabled to activate IPv6 PXE Support. The options are Enabled
and Disabled.
4-26