Supermicro X10DSC-TP4S User Manual page 75

Super X10DSC-TP4S Motherboard User's Manual
Fatal Err (Error) Over
Select Enable to force a fatal error that has occurred to the port specified by
the user to be prorogated to the II0 core error logic. The options are Disable
and Enable.
Non-Fatal Err (Error) Over
Select Enable to force a non-fatal error that has occurred to the port specified
by the user to be prorogated to the II0 core error logic. The options are Disable
and Enable.
Corr Err (Correctable Error) Over
Select Enable to force a correctable error that has occurred to the port specified
by the user to be prorogated to the II0 core error logic. The options are Disable
and Enable.
L0s Support
When this item is set to Disable, II0 will not put its transmitter in the L0s state.
The options are Disable and Enable.
Socket 0 PceiD01F0 - Port 1A/Socket 0 PceiD02F0 - Port
2A/Socket 0 PceiD03F0 - Port 3A (for IIO0 Configuration)
Socket 1 PceiD01F0 - Port 1A/Socket 1 PceiD02F0 - Port
2A/Socket 1 PceiD03F0 - Port 3A/Socket 1 PceiD03F2 -
Port 3C (for IIO1 Configuration)
PCI-E Port (Available for the II01 Configuration only)
Select Enable to enable a PCI-E port specified by the user. Select Disable to
de-activate a PCI-E port specified by the user. Select Auto for the BIOS ROM
to automatically discard a PCI-E port specified by the user when there is no
HP-compatible device connected to this port or when there is no error detected
in this port. The options are Auto, Enable, and Disable.
Hot Plug Capable (Available for the II01 Configuration only)
Use this item to enable or disable Hot-Plug support for a port specified by the
user. The options are Disable and Enable.
PCI-E Port Link (Available for the II01 Configuration only)
Use this feature to disable the physical link connected to a PCI-E port specified
by a user so that no training will take place on the component-level while the
PCI-E configuration commands are still in full force. The options are Enable
and Disable.
4-12