Table of Contents
Advertisement
Super X10DSC-TP4S Motherboard User's Manual
Gen3 (Generation 3) Eq (Equalization) Mode
Use this item to set PCI-E Gen3 Adaptive Equalization mode. The options are
Auto, Enable Phase 0, 1, 2, 3; Disable Phase 0, 1, 2, 3; Enable Phase 1 Only,
Enable Phase 0, 1 Only, Advanced, Enable MMM Offset West, and Alt Short
Channel.
Gen3 (Generation 3) Spec (Specifics) Mode
Use this item to set the Specifics mode for a PCI-E Gen. 3 device. The options
are Auto, 0.70 July, 0.70 Sept and 071 Sept.
Gen3 (Generation 3) Phase2 Mode
Use this feature to configure the Loop-count settings for PCI-E Gen3 Phase 2.
The options are Hardware Adaptive and Manual.
Gen3 DN Tx Preset
Use this item to select the preset setting for a downstream component transmitter.
The options are P0 (-6.0/0.0 dB), P1 (-3.5/0.0 dB), P2 (-4.5/0.0 dB), P3 (-2.5/0.0
dB), P4 (0.0/0.0 dB), P5 (0.0/-2.0 dB), P6 (0.0/-2.5 dB), P7 (-6.0/-3.5 dB), P8
(-3.5/-3.5 dB), P9 (0.0/-3.5 dB), and Auto.
Gen3 DN Rx Preset Hint
Use this item to select a preset setting for a downstream component receiver.
The options are P0 (-6.0 dB), P1 (-7.0 dB), P2 (-8.0 dB), P3 (-9.0 dB), P4 (-10.0
dB), P5 (-11.0 dB), P6 (-12.0 dB), and Auto.
Gen3 UP Tx Preset
Use this item to select the preset setting for a upstream component transmitter.
The options are P0 (-6.0/0.0 dB), P1 (-3.5/0.0 dB), P2 (-4.5/0.0 dB), P3 (-2.5/0.0
dB), P4 (0.0/0.0 dB), P5 (0.0/-2.0 dB), P6 (0.0/-2.5 dB), P7 (-6.0/-3.5 dB), P8
(-3.5/-3.5 dB), P9 (0.0/-3.5 dB), and Auto.
Hide Port?
Use this item to hide the root port from the operating system. The options are
No and yes.
IOU0 Non-Posted Prefetch/IOU1 Non-Posted Prefetch/IOU2 Non-Posted
Prefetch
Select Enable to enble Non-Posted Prefetch support for a PCI-E slot specified
by the user. The options are Disable and Enable.
4-14
Advertisement
Table of Contents
