Maintenance - Bissell CROSSWAVE 2203 Series User Manual

Maintenance:

WARNING
To reduce the risk of fire, electric shock or injury, turn power OFF and disconnect plug from
electrical outlet before performing maintenance or troubleshooting.
1
To release dirty water
tank, press down on
recessed button on the
top of the dirty tank.
Did You Know?
The Float is what prevents your dirty tank from overflowing. When your dirty
tank is full, the float will shut off your suction motor creating a high pitched
sound indicating it is time to empty your dirty water tank.
4
Pour dirty water and debris out. Rinse the
inside of the dirty water tank.
6
Hand wash the vacuum filter and screen
with warm water and mild detergent.
Empty Dirty Water Tank
2
Grab the front handle while
pressing down on button
and pull dirty water tank
away from the unit.
5
7
Rinse the float located at the bottom
of the dirty water tank's top.
3
Grasp top of dirty water
tank in recessed areas on
each side of the filter and
pull upward to remove the
top of the tank.
Remove the filter from the dirty water
tank top by pulling it up.
www.BISSELL.com
9