Bissell CROSSWAVE 2203 Series User Manual page 6

Filling Your Clean Water Tank
1
The clean water tank
is located on the
back of the machine.
Clean Water Tank
Dirty Water Tank
NOTE: Use of additives such as eucalyptus oil may damage your machine and void warranty.
4
For large area cleaning (up to 55 sq m)
a. Fill formula tank with warm tap water
to the second water fill line.
b. Then add formula to the second
formula fill line.
5
Screw the cap back onto the clean
water tank.
A few notes about filling the clean water tank:
• Fill with warm (140°F/60°C MAX) tap water and add the appropriate
BISSELL solution. DO NOT USE BOILING WATER. DO NOT HEAT WATER
OR TANK IN MICROWAVE.
6
www.BISSELL.com
2
Lift the clean water tank
straight up to remove
from the machine.
For small area cleaning (up to 27 sq m)
a. Fill formula tank with warm tap water
to the first water fill line.
b. Then add formula to the first formula
fill line.
6
3
Unscrew the cap from
the clean water tank.
The clean water tank
has two measuring
volumes depending
on the amount of
space you would like
to clean.
On the back of the
machine, align clean
water tank with the
grooves and slide tank
into place until you
hear a click.